Skip to main content

Digistat+RF thermostat

 To operate

  • The display normally shows the current room temperature to within 0.5ºC
  • to adjust the required temperature, turn the dial clockwise to increase or anti-clockwise to decrease, (1 click = 1ºC), the LCD will display the temperature setpoint as it is being adjusted and 'SET' will be displayed.  After a few seconds the display will return to normal operation and will display the actual room temperature.

If you reach the maximum possible setting while adjusting the temperature during normal operation, the display will flash to indicate you cannot adjust the thermostat further.

Watch the video to see how to set minimum and maximum temperature limits on this type of thermostat or download the User Guide for further information.

Share this page

We use cookies to improve user experience. If you continue, we will assume you are happy to accept cookies from this website. Continue